SF-POWERMARK ENGINE DYNAMOMETER

Overview

The SF-Powermark engine dyno features a rugged and durable power absorption unit with a 2” diameter main shaft machined from solid stock 17-4PH stainless steel and it's the only absorber available with cross vented rotors for smooth and fast water flow. Integrated starters are built into the system so a bell housing, flywheel or engine starter is not required. A torsionally compliant driveshaft connects the engine to the dyno enabling you to run right off the engine's crank shaft while 4.5” constant velocity joints ensure smooth power transfer.
The included roll around engine docking cart offers great versatility to adapt to various types of engine's and its stainless steel runners mean easy adjustment of the engine supports without any rust. It’s also compatible with the SF-902S to allow maximum versatility. The tool tray has cutouts for storing spark plugs and lambda probes; it's also a convenient area to mount ignition system components.
To keep the test cell neat, the integrated boom assembly houses both the sensor box and cooling tower, plus it has cable stays to route transducer wires cleanly between the sensor box and the engine. The included non-pressurized cooling tower mounts to the boom assembly behind the dyno, out of the way. The new sensor box also mounts to the boom where it is kept safely away from engine vibrations and heat. WinDyn's® pre-defined test sequences allow for standard tests at the push of a button so you’re up and running immediately and the live trace feature lets you see live data as a trace over a saved reference plot.




Komentar

Posting Komentar

Postingan populer dari blog ini

AC DYNAMOMETERS

Gambar
The Froude AC dynamometer has been specifically designed for the testing of gasoline and diesel engines in R & D and Quality Audit applications.   Low inertia AC motor with standard speed ranges from 3,500 rpm to 10,000 rpm Standard torque hub measurement accuracy is +/-0.2% of the full rated torque of the dynamometer Speed is measured to an accuracy of +/- 1 rpm testingindonesia.com      SPESIFIKASI       Description The AC dynamometer is constructed using a low inertia AC motor especially designed for engine test applications mounted on a substantial fabricated baseframe. On foot mounted versions torque is measured using an in-line torque hub. For trunnion mounted machines a precision strain gauge load cell is used. As an option both versions can include an integrated jackshaft that provides additional overhung load capacity for the engine drive shaft.                 Froude AC       Dynamometer Heat gen
Baca selengkapnya

FROUDE INVENTED THE WATER BRAKE DYNAMOMETERS

Gambar
testingindonesia.com The Froude F Range Hydraulic dynamometers (also referred to as water brakes) have been designed to be compact, robust and to allow easy maintenance. Some of these models are available with a streamlined, fabricated base. This base is not only ultra durable due to the powder coating process, but also offers flexibility with water inlet/outlet placement and lifting eye locations. These engine dynos are fitted with two half couplings which, with the rotor, are oil injected onto the shaft. The standard machines run in grease lubricated rolling element bearings. The hydraulic dynamometer working compartment consists of special semi-circular shaped vanes cast into stainless steel rotor and stators. Water flowing in a toroidal vortex pattern around these vanes creates a torque reaction through the dynamometer casing which is resisted and measured by a precision load cell. The dynamometer load is controlled by a 'butterfly' water outlet valve, oper
Baca selengkapnya

EDDY CURRENT ENGINE DYNAMOMETERS

Gambar
Overview testingindonesia.com SuperFlow offers a broad selection of technologically advanced eddy current absorbers which are ideal for precise engine testing. Low minimum load capabilities allow testing of very small engines, or larger engines running at very light loads and high speeds. Heat is dissipated by cooling water flowing through the stationary portion of the absorber. Rotating water seals have been eliminated. Bearings are pre-lubricated and rated for 5,000 hours of operation between servicing. Standard commercial load cells measure reaction torque for either direction of rotation. The double-ended main shaft may be fitted with a starter motor or used for dual engine connection. Speed is measured by a 60-tooth gear and hall effect sensor. All SuperFlow dry gap eddy current absorbers can be interfaced with SuperFlow data acquisition and control systems for complete engine, dynamometer and throttle control. These systems integrate with personal computers running Supe
Baca selengkapnya